Home About Us Gallery Products Contact Us
Www.LaSpeedometerGear.com www.manualtransmissionkits.com www.americanhotrodsolutions.com www.adapt-a-case.com www.superior-transmission.com www.gopnh.com www.tcsproducts.com www.raybestospowertrain.com

RAYBESTOS 46/47RE STAGE-1 PERFORMANCE CLUTCH MODULE w/ steels

FITS 46RE/47RE TRANSMISSIONS

46RE, 47RE With GPZ Overdrive Brake.Raybestos Stage-1 Performance frictions are the best choice for street rods, "tuner" cars, and mild street/strip applications. Stage-1 Performance frictions are an affordable solution for performance applications that may not require the capacity of the Raybestos Gen2 Blue Plate Special, but do require a friction plate that can handle the demands that a stock tan or high energy plate cannot. COMPLETE STEEL MODULE INCLUDED WITH KOLENE STEELS FOR THE OVERDRIVE BRAKE.

46/47RE Complete Bushing Kit

This bushing kit includes a, pump, case, extension housing, front stator, rear stator, both input sun gear, rear sun gear, reaction shaft front, reaction shaft rear, reverse drum front, and reverse drum rear

ALLOMATIC TRANSMISSION FILTER. FITS 1998-UP.

46/47RE BEARING KIT

A complete BEARING kit, all bearings included for the 46/47re rebuild.        This is a must for every rebuild.

46/47RE TOLEDO OVERHAUL KIT

TOLEDO TTK IS THE BEST QUALITY OVERHAUL KIT ON THE MARKET.THIS OVERHAUL KIT WILL CONSIST OF THESE ITEMS;ALL THE RUBBER SEALS AND O'RINGS FOR THE TRANSMISSION.ALL THE PAPER GASKETS FOR THE TRANSMISSION.HIGH QUALITY TOP OF THE LINE FIBER PAN GASKET.

NOK FRONT PUMP HARD METAL CLAD SEAL.NOK REAR TAIL HOUSING METAL CLAD SEAL.

NOK COMPLETE SEALING RING KIT.PUMP NYLON OIL FILTER SCREEN.

GOVERNOR NYLON OIL FILTER SCREEN.TCC/PRESSURE NYLON OIL FILTER SCREEN.

NEW OEM SNAP RING FOR THE FRONT PLANET TO OUTPUT SHAFT. THESE ARE THE KITS THE PROFESSIONALS USE.  DON'T SETTLE FOR LESS.

500-518 (89-04) TransAction Kit

High Performance


Offers 3 levels of Performance: 1. Heavy Duty 2. Street & Strip 3. Full Competition


Transforms your automatic into a true performance transmission! * Rapid fill manual valve * Quicker throttle response * Helps keep clutches and band alive under extreme demand * Services A500, A518, A618, 42RE, 46RE, & 47RE (1989-2004) * Improves overall performance 1. The rapid fill manual valve allows converter charge when transmission is in park. 2. This TransAction kit will service both gas and diesel motors.

46/47RE THRUST WASHER KIT

COMPLETE THRUST WASHER KIT

 FITS 1990-UP

RPS38961 DODGE PRO-SERIES BAND

727 / 518 / 618 Kickdown "Pro Series' HI-Performance Raybestos

1962-UP Raybestos "PRO SERIES" front Kickdown band Raybestos

SONNAX FRONT SERVO PISTON COVER KIT

In vehicles with A727 (71-later), and 46 & 47RH/RE transmissions it is common to have long slide 2-3 shifts, direct (front) clutch failure or poor line pressure. These complaints can be caused by the front servo piston cover bore wearing the pin bore. In 3rd gear, direct clutch oil is present under the servo cover to release the band. Oil leaks due to a worn cover affect 2-3 shift and direct clutch durability.

DODGE PISTON RETAINER KIT

Overdrive piston retainer for 46RH, 46RE, 47RH, 47RE transmissions. Excessive clearance between the overdrive piston retainer and intermediate shaft reduces lube flow to the gear train. An added seal compensates for variations in case I.D. Oil is delivered to maximum load points on shaft.

DODGE ACCUMULATOR PISTON

FITS DODGE UNITS 1980-UP

DODGE REAR SUN GEAR BUSHING

WIDE REAR SUN GEAR BUSHING

 DODGE GOVERNOR PRESSURE SENSOR

DODGE GOVERNOR PRESSURE SENSOR.

EARLY 1996-1999

ROUND 4 PIN CONNECTOR

LATE 2000-UP

4 PIN CONNECTOR WITH ALL PINS IN ONE ROW


 HEAVY DUTY GOVERNOR PRESSURE SOLENOID

DODGE GOVERNOR PRESSURE SOLENOID

FITS 1994-UP

Adapt-A-Case Unbreakable Power Wedge Intermediate Band Anchor

The Power Wedge arrives milled from super-tough AISI 1018 Steel and will never suffer failure. It has the capability of handling literally tons of pressure; by its installation the customer will have simply eliminated a weak link.

Adapt-A-Case Steel Reverse Servo Pin

Gold anodized for enhanced durability, this pin will hold up to what working trucks can hand out.

SONNAX Rear Servo Piston

The servo piston has a tendency to get cocked in the bore, inhibiting band apply. The high reverse line pressure continues to apply against a cocked piston, causing piston breakage. The bore of the piston also wears from side loading, resulting in insufficient band apply pressure. Sonnax offers rear servo piston 22912C to address these problems.

OVERDRIVE DIRECT SNAP RING

DODGE OVERDRIVE DIRECT SNAP RING, WAVED FRONT, FITS 1988-UP

TCS A518, A618, 47RE & 48RE BILLET ALUMINUM PISTON

  Made for Performance Dodge Diesel & Gas Applications!


The billet aluminum clutch piston is CNC machined providing a more positive and balanced clutch application over the O.E.M. cast piston.

727-518-618 Super Servo (Superior K080 )

This servo deals with these problems: * 11% More Holding Power * Firmer 1-2 Shift * More Positive 2-3 Shift * Perfect for Heavy-Duty and Performance Applications * Includes Heavy Duty Band Strut

A518, A618, 47RE, 48RE 4.2 Ratio Band Lever

The 4.2 ratio band lever provides greater mechanical clamping force than the O.E.M. 3.8 ratio lever ie: Placing 1 pound of force on the tip of the apply lever produces 4.2 pounds of force on the band.

CNC machined from 4140 HTSR for added strength.

518/618/47-48RE This Input Shaft and Hub is designed for higher HP engines and/or Multi-Disc Converter

High Performance


Made for Performance Dodge Diesel Applications!

Shaft is made from 300 Maraging steel and heat treated to withstand high stress and torsional loads.

Hub is made from 4140 heat treated stress relieved billet steel for additional durability.

Precision ground at all critical diameters.

Shaft to hub splines have been increased from O.E.M. 28 to 35 splines for 25% MORE Surface Contact

Tested to 2,700 ft/lbs. of torque.

518/618/47-48RE PML DEEP CAST ALUMINUM PAN

High Performance

Made for Performance Dodge Diesel Applications!


PML Transmission Pan Features


Increased oil capacity for cooler temperatures

Sand-cast aluminum with raised fins

3/16-inch thick wall construction to add strength to the transmission case

3/8-inch thick gasket flange will not bend when bolts are tightened

Machined gasket surface for a secure seal

Boss cast into pan can be machined for a temperature sensor

Magnetic drain plug for easier, less messy maintenance

Mounting hardware provided

HAVE QUESTIONS OR NEED TECHNICAL HELP?

CALL 318.779.1006

EMAIL TECH@BRTPERFORMANCE.COM